WINGBOARD 4-IN-1 INFLATABLE

SUP – WINDSURF – WING SURF – WING PADDLING

Ideal for those who want to learn to handle a FreeWing in the water without the use of a foil. The wide nose and tail provide enough stability, while the length and parallel rails generate the glide and speed.

The board comes with a removable mast base for windsurfing, rail edges for better release, and a carry strap that can also be used as a paddle holder.

ALL YOU WANT AND MORE

WELDED RAIL TECHNOLOGY

• Every Starboard inflatable paddle board features welded rails.
• The Welded Rail Technology creates a complete airtight, mechanically bonded seam without the risk of glue weakening over time. This makes Starboard inflatable paddle boards stronger and longer lasting.

THE WIDE NOSE AND TAIL

Provide you with enough stability, while the length and the parallel rails generate the glide and speed.

NEW TWO REMOVABLE CENTER FIN BOXES

Closer to the rails for better tracking and upwind reach. Remove the boxes for an improved paddling experience without the added weight or drag. Attach the boxes and mount the supplied Drake Shallow center fins to prevent the board from drifting sideways when windsurfing and wingboarding.

2-IN-1 SHOULDER CARRY STRAP & PADDLE HOLDER

Velcro loops to attach your paddle.
Easier to carry as the board simply hangs effortlessly on the shoulder and frees up your hand to multi-task, hold your coffee, or phone.
When not in use, the strap sits flat on the board so it doesn’t drag in the water.

FOOTSTRAP INSERTS

Make it easy to know where to position the feet and always be in the right spot to trim the board.

FULL POWER PLANING

Our Wingboard 4-in-1 Inflatables feature our 3D Rail Edge technology, a proprietary 3D elastomer compound that follows the contours of the board and creates a release edge that allows the boards to fully plane yet fold and roll up. Thanks to this 3D Rail Edge, you can accelerate and enjoy the most exciting planing sensation possible on an inflatable board.

REMOVABLE MAST TRACK

For a flat deck in the paddle board mode.

NEW DROP FIN BOX

The outline improves the hydrodynamic efficiency of the box and reduces its drag by 50%.
Smart reinforcements reduce the weight by 10%.

BUNGEE TIE DOWN

A bungee tie down in front of the board, for storing gear and supplies.
The bungee is attached with 4 D-rings which can be used to clip on your bags and gear.

RE-COVER BAG

LIGHT, STRONG, LARGE

Is designed to minimize weight, yet maximize comfort and strength.
Roller wheels available on every bag make it more comfortable for a long walk.
Hiking strap is ergonomically curved to ensure good stability on the shoulders.

FREE LIGHTWEIGHT LEASH

At only 70g, the leash is incredibly light.
Soft cushioning means it will flatten when stood on.
Easy to attach to the leash ring without needing any excess rope loop.

PUMP INCLUDED

FAST, EASY, AND COMFORTABLE

Fixed hose and manometer position when inflating.
10% more efficient thanks to the redesigned piston and outside tube for the air outlet. Plus, double and single action pumping modes and wider foldable foot base increases stability when pumping.
The base and handle are made from upcycled fishing nets.

ZEN CONSTRUCTION

BEST VALUE, WELDED, AND LIGHTEST

With only the best core essentials. Built with single layer Linear dropstitch making it even lighter and stiffer than before. This Linear knitted dropstitch was developed by Starboard with its supplier for Starboard use ONLY.
The Heat Welded rails create a complete airtight, mechanically bonded seam without the risk of glue weakening over time. Making the board stronger and last longer.
Galvanized 2000D rails increase strength and stiffness.

Model	10'4" x 31"
Rider Weight	45-105 kg
Length	10'4" / 315 cm
Width	32" / 81.3 cm
Thickness	6" / 15 cm
Tail Width	20.6” / 52.3 cm
Volume	310 L
Foot strap	Included
Fin Set Up	SUP: Single WS: 3 fins
Fins	Back: 8" Center: Drake shallow 220
Weight	10.8 kg (Avg.)

2024 STARBOARD INFLATABLE SUP 10'4" X 31" WINGBOARD 4 IN 1 LEARNER ZEN SC BOARD

Quantity